Introducing Firefree Class A, the ultimate wood fire retardant coating that meets all ASTM E84 standard requirements, including 30 Minutes Extended test.
Firefree Class A (“FFA”) is a premium quality water based, non- toxic, single component, thin film intumescent flame retardant coating fully tested that complies to all ratings in accordance with ASTM E84, ASTM E84, 30 minutes extended, ASTM E2768 Ignition Resistant at a minimal dry film thickness application.
FFA is listed by the California State Fire Marshal, inspected by the International Code Council.
Firefree Class A can be easily applied by airless sprayer, roller or brush by an experienced/licensed contractor in strict compliance with the application instructions.
Firefree Class A has been rigorously tested at QAI Laboratories, an IAS-recognized fire testing laboratory & CALFIRE-approved testing Laboratory. The results demonstrate its exceptional fire-resistant properties. In a 10-minute ASTM E 84 (NFPA 255, UL 723) test, Firefree Class A achieved a Flame Spread Index of 25 with a less thickness of 6 mils or .006 inch and a Flame Spread Index of zero with a thickness of 10 mils (.010 inch), also meeting the requirement for a smoke-developed index of 30 (=50) for use in air plenum spaces.
Extended testing for 30 minutes under ASTM E84 (NFPA 255, UL 723, Chapter 7A CBC) for Ignition Resistance showed remarkable results. Firefree Class A applied to various substrates, including engineered OSB and Douglas fir, achieved both an FSI (Flame Spread Index) and smoke-developed index (SDI) of zero at different thicknesses, indicating no significant progressive combustion. The coating also demonstrated minimal char damage, highlighting its ability to maintain the structural strength of materials in a fire situation.
It’s important to note that while Firefree Class A has proven effective in laboratory tests, its performance in an actual fire may vary due to different conditions and the variability of fire tests. As a component of complete fire retardation systems, it contributes to slowing fire spread only where applied and does not prevent a fire from starting or continuing. The effectiveness of Firefree Class A in a particular fire will depend on factors such as the amount applied, the conditions of other assembly elements, and the actual fire conditions. It is crucial for the applicator to follow application directions and for the occupier to ensure the paint is in good condition for optimal fire safety.
If you have any questions before, during, or after applying the product that is not covered in the application instructions, please contact support@firefree.com. Provide detailed information and documentation regarding your questions.
Our Firefree 88® Intumescent Coating meets fire-resistant ratings mandated by the International Building Code, including FM 4975, ASTM E 119 (1 and 2 hours), ASTM E 662-97, ASTM E 162-98, ASTM E 3675-98, ASTM E 814, ASTM E 1354-94, ASTM E 84, Room Corner Test (UBC 8-2, UBC 26-3, NFPA 286), EN 13501-1, and BS 476. This intumescent coating is specifically designed for use on wall assemblies, floor/ceiling assemblies, roof ceiling assemblies, and individual structural members, providing reliable fire protection where it matters most.
FfA meets all ASTM requirements, which is the industry standard for noncombustibility and is utilized to rate fire-retardant-treated lumber. FfA is a fire retardant paint for wood that is listed & inspected by the ICC (International Code Council).
Firefree Class A fire-retardant paint is highly cost-effective. Due to its superior fire-retardant properties, the wood fire retardant coating requires only a thin layer, resulting in significant savings in material and labor costs—typically 35% or more—compared to other fire-retardant coatings.
Firefree Class A is easy to use. It’s a high-quality, nontoxic, water-based, fire-retardant paint with a smooth white finish. In many cases, FfA can be used without a primer, saving you money. You can apply this fire retardant paint for wood easily with a brush, roller, or sprayer.
Firefree Class A is a cost-effective fire retardant coating. It slows fire spread and doesn’t show significant combustion even in a 30-minute test. Wood treated with FfA maintains structural integrity with minimal char damage in wildfire situations.
Our wood fire retardant coatings are safe and eco-friendly, with very low VOCs (less than 36 gr/liter), well below the current EPA rules and regulations of 250 gr per liter & even California’s limit of 50 gr per liter. Our product is extremely nonflammable and environmentally friendly.
Firefree Class A is a paint that can be used on wood to make it noncombustible. It works on many types of combustible materials like oriented strand board (OSB), Douglas fir, plywood, and more. This fire retardant paint for wood is great for residential, multifamily, commercial, and industrial projects.
